高输出功率小交流电实验室检测台仪（耐弧光实验室检测台仪）-（计算出机的控制）

High voltage low current tester (arc resistance tester) - (computer control)

好产名称大全称：耐电弧试验机

Product name: electric arc resistance tester

成品尺寸：NDH-A

Product model: NDH - A

需要满足标准规范：GB/T 1411-2002《混合物绝缘带的材料耐高低平电流量电孤自放电的耐压试验》（相等IEC  61621-1997）及ASTM D495等标准规定的追求设计的概念研制的，并具备IEC 149、UL 746A等应力测试技巧

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

关键采用领域及性能：

本实验机是确定软件应代替减速机、家电和家廷用家电等服务业的技工用pp金属、树酯胶胶和隔绝漆等隔绝建筑产品的耐弧光放电使用性能方面评判，主代替固态物隔绝建筑产品如：pp金属、胶片、树酯胶、矿石、淘瓷、波璃、隔绝油、隔绝漆、厚纸板等材质的耐弧光放电使用性能方面考试；

本试验检测机由计算的机调节加载，可以出现特定科学研究性动态及科学研究性日期，科学研究性结束了后并手机截图特定科学研究性统计资料，并可打印机.规范实验所申请书。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 超声波焊接机为前后左右整体形式，下端为方法系统软件，上侧为试验装置箱。

2 本产品的分为*新自动化掌握的技术，经由使用环节（IEC或ASTM）可一键来实验设计，并在线上上体现实验设计进程和结论。

3 **效能充分，抗干涉本事强，检测精度等级高。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 焊弧通断日子确定误差：大于 ±10ms

2 调压器存储容量：2kVA

3 特殊实验室检测直流电压：12.5kV

4 试验报告电流电压要求：±3%

5 电流大小调控高精准度：±10%  工作电流检测精确：1.5%

6 探针对坯料心理压力：（0.5±0.05）N

7 电极片素材：钨棒

8 电级距：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 采用环保温度因素：（23±2）℃

10 动用学习环境温度：（50±5）%

11 电：220V±5%  50Hz  10A

12 应力测试    工艺：   新国标/美标/10 mA 持续/20 mA 陆续/30 mA间隔/40 mA连着

13 做实验的时候编译程序以下几点：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 物品技术参数：

NDH-A    耐弧光检测仪-微机操控

NDH-B    耐焊弧现场实验仪-触感屏把控好

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！